RALEIGH CHOPPER ERA 70’s/80’s VINTAGE SPEEDO BICYCLE SPEEDOMETER CABLE NOS

• A CHANCE TO PURCHASE A RARELY FOUND COMPLETE INNER AND OUTER SPEEDOMETER CABLE FOR CLASSIC VINTAGE SPEEDOS.
• WE THINK THIS WAS MADE BY HURET BUT WE ARE NOT 100% SURE SO WE ARE SELLING IT AS MAKER UNKNOWN .
• THIS WILL FIT HURET AND RALEIGH SPEEDO’S FROM THE 70’s , 80’s and 90’s PLUS MANY OTHER SPEEDO’S INCLUDED IMPORTED ONES
• THESE WERE USED IN THE SEVENTIES AND EIGHTIES WHEN SPEEDO’S WERE POPULAR
• THESE WERE USUALLY USED WITH THE LARGE DIAL SPEEDOMETERS BUT THE SMALL HEAD ONES USUALLY USE THE SAME CABLE
• The cable inner has the same width at both ends and is 2.5mm
• CABLE LENGTH APPROX 470mm (18.5″)
• CABLE COLOUR BLACK
• THESE DO NOT FIT ALL HURET OR ALL SCHWINN BIKES , YOU NEED TO CHECK YOUR SIZES , AS STATED ABOVE THE INNER WIRE IS 2.5mm AND THE FIXING NUT ON BOTH ENDS ARE 11mm ( SOME SPEEDO’S USE 10mm ) IF IN DOUBT DO NOT BUY UNLESS YOU ARE WILLING TO TAKE A CHANCE